Products

New Products

Metal Corrugated Plate Packing

Structured packing is packing material arranged and stacked in a uniform geometric shape within a tower. The entire tower section has a regular, symmetrical, and uniform geometry, defining gas-liquid flow channels, reducing channel flow and wall flow phenomena, and allowing for very low pressure drop. Under the same energy consumption and pressure drop conditions, it provides a larger specific surface area than random packing, achieving higher mass and heat transfer efficiencies for the same volume.

Send Inquiry

Product Description

Structured packing is packing material arranged and stacked in a uniform geometric shape within a tower. The entire tower section has a regular, symmetrical, and uniform geometry, defining gas-liquid flow channels, reducing channel flow and wall flow phenomena, and allowing for very low pressure drop. Under the same energy consumption and pressure drop conditions, it provides a larger specific surface area than random packing, achieving higher mass and heat transfer efficiencies for the same volume. In recent decades, structured packing has been widely used in many towers in fine chemical, fragrance, oil refining, fertilizer, and petrochemical industries.

Metal corrugated plate packing consists of several parallel and perpendicularly arranged metal corrugated plates with small holes. The corrugation apex angle is approximately 900 degrees, and the channels formed by the corrugations are at an angle of 45 degrees or 30 degrees to the vertical direction. The flow channels of two adjacent corrugated plates are at 90 degrees, and the upper and lower corrugated packing plates are stacked and rotated 90 degrees. In towers with small diameters connected by flanges, the corrugated packing is formed into complete discs with a diameter slightly smaller than the inner diameter of the tower. Metal corrugated plate packing is mainly used in reaction towers in chemical and industrial processes such as packed towers, stacked towers, and spin towers.

Product Parameter

Model	Surface area ㎡/m³	Void fraction %	Nt M⁻¹	Pressure drop Pa/m
125X	125	98	0.8-0.9	140
125Y	125	98	1-1.2	200
250X	250	97	1.6-2	180
250Y	250	97	2-2.5	300
350X	350	95	2.3-2.8	230
350Y	350	95	3.5-4	350
500X	500	92	2.8-3.2	280
500Y	500	92	4-4.5	400
700Y	700	90	9	660
1000Y	1000	90	13	850

Product Feature

1. Good elasticity and wear resistance: Metal Corrugated Plate Packing is made of metal, which has good elasticity and wear resistance and can adapt to chemical reactions under different conditions.
2. Uniform layout: Metal Corrugated Plate Packing has a uniform layout, which can improve the production capacity of the reaction tower and reduce the loss of reactants.
3. Good compaction performance: Metal Corrugated Plate Packing has good compaction performance, and can apply sufficient pressure on the tray to ensure the compaction of the packing.
4.Easy to clean and replace: Metal Corrugated Plate Packing is typically designed to be removable, making it easy to clean and replace.

If you are interested in Metal Corrugated Plate Packing , or would like to know its selection recommendations and pricing information for different working conditions, please feel free to contact us.